This is a much nicer relays board than my last one which was more for experimentation more than anything just to see if certain things were going to work the way I wanted them too. This new one I put together is better laid out, has more relays on the board and more terminals for the DTMF request from the Voice Box. The board is a little shorter than my old one width wise but a little higher height wise but given that it better made and has more on it I'll be able to work that under the passenger side of the dash a lot easier than my last set up. This new board also has Rectifier Diode Bridges built in before each relay so this will eliminate the problem I was having with switches that activated relays interrupting my SFX module when the relays were switched off. I'm a little fuzzy on how that works exactly but it works and it cured the problem so that is what counts. ;)
Showing posts with label SFX. Show all posts
Showing posts with label SFX. Show all posts
Friday, October 23, 2015
A Better Relay board
This is a much nicer relays board than my last one which was more for experimentation more than anything just to see if certain things were going to work the way I wanted them too. This new one I put together is better laid out, has more relays on the board and more terminals for the DTMF request from the Voice Box. The board is a little shorter than my old one width wise but a little higher height wise but given that it better made and has more on it I'll be able to work that under the passenger side of the dash a lot easier than my last set up. This new board also has Rectifier Diode Bridges built in before each relay so this will eliminate the problem I was having with switches that activated relays interrupting my SFX module when the relays were switched off. I'm a little fuzzy on how that works exactly but it works and it cured the problem so that is what counts. ;)
Monday, October 12, 2015
SFX Module Installation
After hooking up those few SFX out in the car and giving it a test I did notice something unusual that happens, the SFX all play fine when the buttons are pressed but while the SFX is playing if you hit another button the SFX stops or seems to reset, which is odd considering I have not yet connected up the reset pin wire. I have a hunch that I may need to add in some rectifier diodes into my wiring scheme and see if that cures the issue. I think my SFX module might be getting some kind of signal backwash from the other buttons so I'm hoping that the diodes should correct that. I'll do some experimenting today and see. lol it's funny how things work awesome on the bench until you actually install it into the car along with all the other electronics and then discover annoying little issues like this ;)
Subscribe to:
Posts (Atom)